Molecular filtration hood for adsorption on activated carbon Black Activa Walk-in

Certified EN 14175-3: 2003

The hood has been designed to protect both the operator and the surrounding / external environment from any contamination by manipulation of toxic or harmful chemical substances coming from the work area. Depending on the nature of the vapors treated, it is possible to use simple carbon filters or impregnated with chemical substances to favor the absorption or neutralization of the substances in use.

main features

- structure in tubular and carbon steel sheet, thickness 12/10, epoxy powder painting (durability over time, chemical resistance).

- not equipped with a worktop

- lower part of the machine (support) consisting of a steel sheet, 5 mm thick, folded on three sides and closed. The front part can be opened by means of two polycarbonate doors hinged to the right and left, for the introduction of machinery or anything else under the hood.

- 6 mm tempered front glass that can be opened vertically divided into two parts (Black Activa Walk-In Standard) or motorized up and down with adjustable limit switches (Black Activa Walk-In Plus). The front glass ends at 80 cm from the floor (at the level of the polycarbonate doors)

- frontal glass raising-lowering controls (Black Activa Walk-In Plus)

- possibility of ducting outside the expelled air where possible from the installation room by adding the drain connection

- double rear suction bottom in polycarbonate to uniform the horizontal air flow from the front of the machine (Black Activa Walk-In Plus)

- predisposition to accommodate up to 3 filters in series (3 coal or 2 carbon plus 1 HEPA) on each filtering group, of different thicknesses

- modern electronic board controlled and controlled by a new generation microprocessor

- control panel with soft-touch polycarbonate keyboard and a high-tech electronic board with the following functions:

- main 0 / I light switch

- fan motor operating button

- fluorescent lamp on button

- hourmeter for engines and filters use

- real-time reading of the air speed (in m / sec) on the front opening by numeric display (Black Activa Walk-In Plus)

- keys for manual adjustment of the speed of the aspirated air (Black Activa Walk-In Standard)

- window lifter motor activation buttons (Black Activa Walk-In Plus)

- insufficient speed alarm (Black Activa Walk-In Plus)

- prefilter clogging alarm

- visual alarm on display for exceeding the maximum period for replacing the installed filter (resettable)

- high quality long lasting radial fan with manual adjustment (Black Activa Walk-In Standard) or automatic speed electronic (Black Activa Walk-In Plus)

- manual adjustment (Black Activa Walk-In Standard) or automatic (Black Activa Walk-In Plus) of air speed able to compensate:

- continuously changes in the front glass opening

- the progressive clogging of prefilters, carbon filters and absolute filters

- the presence of one or more operators in front of the cabin, reducing turbulence in the work areas

- minimum degree of electrical protection IP44 for fan motors and window motor (when present), IP55 for electrical panel.

Technical features

- lamp: fluorescent (18W power)

- power supply: 230V - 50 Hz single-phase

- noise level: 60 dB max

- air speed: 0.45 m / sec (factory set) (parameter modifiable from 0.40 to 0.60 m / sec)

- installed power:

- Black Activa Walk-In 90-120: 275 W standard / 445 W plus

- Black Activa Walk-In 150-180: 300 W standard / 470 W plus

- external dimensions:

- Black Activa Walk-In 90: 905 x 750 x 2300 mm (W x D x h)

- Black Activa Walk-In 120: 1205 x 750 x 2300 mm (W x D x h)

- Black Activa Walk-In 150: 1505 x 750 x 2300 mm (W x D x h)

- Black Activa Walk-In 180: 1805 x 750 x 2300 mm (W x D x h)

- useful internal dimensions:

- Black Activa Walk-In 90: 860 x 700 x 1665 mm (W x D x h)

- Black Activa Walk-In 120: 1160 x 700 x 1665 mm (W x D x h)

- Black Activa Walk-In 150: 1460 x 700 x 1665 mm (W x D x h)

- Black Activa Walk-In 180: 1760 x 700 x 1665 mm (W x D x h)

- weight:

- Black Activa Walk-In 90: 170 kg standard (without filters)

- Black Activa Walk-In 120: 190 kg standard (without filters)

- Black Activa Walk-In 150: Kg. 215 standard (without filters)

- Black Activa Walk-In 180: 230 kg standard (without filters)

compliance

The hoods have E marking, and are built in compliance with DIN 12924 and DIN 12927, with the CEI 66-5 directive (EN 61010)

Available models:

Black Activa 90 Standard Walk-In hood

Black Activa 120 Standard Walk-In hood

Black Activa 150 Standard Walk-In hood

Black Activa 180 Standard Walk-In hood

Equipped with:

n ° 1 floor support

n ° 1 radial fan

1 x 18 Watt fluorescent lamp

n ° 1 pair of prefilters

1 power supply cable 230 V - 50 Hz (1 phase + 1 neutral + 1 earth) equipped with an Italian or schuko plug (customer's choice: specify when ordering)

Black Activa 90 Plus Walk-In Hood

Black Activa 120 Plus Walk-In hood

Black Activa 150 Plus Walk-In Hood

Black Activa 180 Plus Walk-In Hood

Equipped with:

n ° 1 floor support

n ° 1 radial fan

1 fluorescent lamp 36 Watt IP65

n ° 1 set of prefilters

1 power supply cable 230 V - 50 Hz (1 phase + 1 neutral + 1 earth) equipped with an Italian or schuko plug (customer's choice: specify when ordering

Wide range of accessories applicable to the hood, Activated carbon filters and hepa according to the substances to be neutralized.

DIFFERENT OPTIONS